We have owned Norwalk juicers in the past, but have found the quality is lacking and the inherent design flaws can be frustrating.

The Pure Juice Press took the basic 2-stage hydraulic press style juicer that is recommended for the popular Gerson Therapy and made it even better.

After using the Pure Juice Press, we simply found it to be the best 2-stage hydraulic press juicer on the market.

The PURE has the highest output and the lowest cost of any two-stage juicer. This means, if you take every item into consideration that contributes to the cost of owning a juicer the PURE Juicer is the most cost effective product available.

The better your juicer the less money you spend on produce. In other words, the PURE Juicer will pay for itself over time in produce savings.

Highest quality materials tested with intense scrutiny to make sure the juices withstands even the hardest tries day after day, year after year.

In the end this is what really matters. Squeezing even the last drop of liquid out of the produce to capture every enzyme.

Even the smartest piece of engineering is useless if its designer can’t make features accessible for its user. The PURE had simplicity in mind from the get go. It is designed based on feedback from every type of user group and build by a team with over decade of experience, embedded in a commitment to serve you for years to come.
You will find, that the PURE Juicer is the easiest to clean juicer as well.


Offset Feed Chute
The Offset Feed Chute prevents spraying produce on the ceiling that can be an issue with competitor models.

Hardened Cutting Blade
The specially designed 8 blade hardened stainless steel cutting blade will retain its edge longer and cut more efficiently than the competitors blade.

Twist and Lock Feed Chute
The easy to assemble &  disassemble feed chute locks on with a click and is removed by pressing a button.  No difficult to use tool or  thumb screws are used.

Stainless Press Tray
The oversize stainless steel press makes it easier to maneuver your filled pressed cloths into and out of the juicer.

Flush Mouted Grid Tray
The Grid tray mounts flush to the feed chute housing, the low profile means no left to right transfer-snagging of the pulp pack between folding and placement in the press chamber. The pull-tab also acts as a hang tab for juice bags and since the PURE cutter is designed to lock to the motor shaft in use; so the Grid Tray pull-tab is also designed as the release-tab; so that with the lightest touch it freely ejects the cutter. There are also two grid retention tabs so the grids are drawn out with the tray.

Large Pressing Chamber
The over-size pressing chamber allows you to press one quart of juice in one pressing.  This is up to 20% more than the competitor model. This can save you lots of time when pressing larger batches.  

Mirror Finish Press Plate
The mirror finish press plate can be used to fix your hair!  Aside from that it is made for reinforced stainless steel that will evenly distribute the power of the press on your produce to ensure you get the highest yield possible.

Protective Bumper
The protective bumper on the Pure Juicer ensures the stainless steel finish of the Juicer stays blemish free.  Just take a look at a few year old competitor model for damage that can occur.

Uniquely Shaped Pusher
The specially designed pusher ensures all the the produce you put into the grinder is properly shred so it can be juiced.  Flat-bottomed pushers may allow pulp that does not get ground up and may spit back up at you.

Specifications:

• Stainless Steel Construction
• 1/2 Horsepower
• 372 Watts
• 115 Volts 60 Hertz
• 3450 RPM 
• 12 Year transferable home warranty
• 2 Year Commercial Warranty

Accessories  included: 

• Serrated Cutter, made from Hardened 440A Stainless Steel Cutter with 8 teeth for easier grinding
• Silicone Cutter Removal Sleeve
• Mirror Polished Juice Tray; large and tall tray for yields up to 1 liter per squeeze
• Mirror Polished Feed Pan to control overflow and guide produce into the food chute
• Grid Tray and 8pc smooth sided SS grids for juicing, nut butters, frozen treats baby food, etc.
• Press Plate, easy to remove with no guide pin required
• Food Grade ABS Pusher, curved to push every bit through and keep the pulp cool
• 6pc MSHP Press Cloths and 4pc MSHP Press Bags, less pulp sticks to them making cleanup a snap
• 3 pcs spare Silicone O-rings
• 0.8 meter power cord IEC / NEMA 15-5, USA 3 pin plug,
• All food contact parts are all food grade are stainless steel (except the Curved Pusher)
• 54-page Manual that is really a treatise on the theory underlying two-stage cold press juicing